Vapor Shield 601G is a VOC free two-component epoxy resin based on renewable ingredients. It does not contain any ingredients on The Living Building Challenge (LBC) Red List. The Vapor Shield 601G epoxy system designed to seal concrete and reduce moisture vapor transmission through a slab having relative humidity levels between 75% and 95% as measured by ASTM F-2170.
Easy application for tight construction schedules
Renewable ingredients that are Red List free
Sustainable impact with improved indoor air quality
Protects terrazzo surfaces for years to come
Moisture Vapor Shield 601G is used to mitigate moisture vapor transmission through concrete slabs having greater than 75% relative humidity when tested according to ASTM F2170. Can be used in industrial, commercial, retail, institutional and healthcare facilities.
Working (Pot) Life: 30 minutes
Re-Coat Time: 8-10 hours @ 75°F
Full Set Time: 12-24 Hours
Full Cure Time: 7 days
Pour TERRAZZCO Vapor Shield 601G Part A resin (3.5 gallons premeasured) with Part B hardener (1 gallon premeasured).
MVS 601G yields approximately 300-400 square feet per mixed unit. Apply more material to areas showing greater penetration and soaking into the substrate.
1. Premix TERRAZZCO® Vapor Shield MVS 601G resin part A using a low speed drill and jiffy blade for two minutes at medium speed.
2. Add TERRAZZCO® Vapor Shield MVS 601G hardener part B to TERRAZZCO® Vapor Shield MVS 601G part A. Resin and hardener are supplied packaged in pre-measured quantities so that the entire contents of hardener part B is poured into the container of resin part A and mixed. Mix using the drill and jiffy blade for two to three minutes at medium speed.
3. Pour the mixed material onto the working area and spread using a squeegee followed by a 1/4 in. nap roller to achieve a thickness of 16 mils, and double coated if needed (appromixately 300 – 400 sq. ft. per unit).
TERRAZZCO® MVS 601G is packaged for convenient mixing at the worksite. Part A resin is premeasured in 3.5-gallon pail. Part B hardener is premeasured in a 1-gallon can.
Self Life: Material has a one-year shelf life from the date of manufacture when stored at 55°F to 90°F and in its original container.
Storage Conditions: Materials should be stored in a temperature and humidity-controlled environment and out of direct sunlight. The part B hardener is susceptible to freezing. Keep resins and hardeners separated from each other until ready for use. Materials should be kept away from sources of ignition.
Groutless® EZPour Epoxy 158G
A two-part terrazzo product when combined with aggregates yields a durable and decorative terrazzo flooring system.
Floor Aid Flexible Membrane 528G
A two-part terrazzo product when combined with aggregates yields a durable and decorative terrazzo flooring system.