TERRAZZCO Flexa-Flex Joint Filler

Typical Uses of Flexa-Flex Joint Filler

TERRAZZCO® Flexa-Flex Joint Filler 1200 can be used in industrial, commercial, retail, institutional and healthcare facilities. This product supports the terrazzo from high impacts that come into contact with the flooring surface.

Packaging

TERRAZZCO® Flexa-Flex joint filler 1200 resin part A and hardener part B are packaged in pre-weighed amounts so that mixing at the job site is easy to handle. Just add hardener part B to resin part A and mix for two to three minutes. Minimum order quantity is two-gallon units.

Advantages of Flexa-Flex Joint Filler

Product Information

Self Life: Epoxy resin does not have a shelf life and hardener has a 1-year shelf life in unopened containers.

Storage Conditions: It is suggested that materials are stored in a temperature and humidity controlled environment. If this is not possible materials should be allowed to acclimate to controlled environmental conditions of application. Keep resins and hardeners separated from each other until ready for use. Materials should be kept away from sources of ignitions. Materials should be stored in their original unopened container.

VOC Contents: Zero VOCs

Shipping: Available in the United States and North America. Contact Sales for Quote.

Technical Information

Hardness Shore D: 40-60

Tensile Strength: 400-600 psi

Compressive Strength: 400-600 psi

Elongation: 60-80%

Mixing Ratio

TERRAZZCO Flexa-Flex Joint Filler are pre-weighted and packaged so one container of Part A resin is mixed with one container of Part B hardener.

Mixing Instructions

1. Pre-mix TERRAZZCO® Flexa-Flex Joint Filler resin part A using appropriate mixing equipment for two to three minutes.

2. Add pre-weighed TERRAZZCO® Flexa-Flex Joint Filler 1200 hardener part B to TERRAZZCO® Flexa-Flex Joint Filler 1200 resin part A and mix for two to three minutes. Resin and hardener are pre-weighed and packaged so that the entire contents of the hardener part B is poured into the entire contents of the resin part A and mixed.

3. TERRAZZCO® Flexa-Flex Joint Filler 1200 may be poured in the joint so that it is flush with the floor. For complete installation instructions, contact your Concord Terrazzo Company authorized representative.

Working Data

Working (Pot) Life: 40-50 minutes @ 75­°F

Re-Coat Time: 8-10 hours @ 75­°F

Full Set Time: 24-48 hours @ 75°F

Full Cure and Maximum Performance: 5-10 days

Coverage

1/8″ x 3/4″: 200 Linear Feet per Gallon

1/8″ x 1″: 150 Linear Feet Per Gallon

1/8″ x 1 1/4″: 125 Linear Feet Per Gallon

1/8″ x 1 1/2″: 100 Linear Feet Per Gallon

1/8″ x 1 3/4″: 85 Linear Feet Per Gallon

1/8″ x 2″: 75 Linear Feet Per Gallon

3/16″ x 3/4″: 135 Linear Feet Per Gallon

3/16″ x 1″: 100 Linear Feet Per Gallon

3/16″ x 1 1/4″: 85 Linear Feet Per Gallon

3/16″ x 1 1/2″: 70 Linear Feet Per Gallon

3/16″ x 1 3/4″: 60 Linear Feet Per Gallon

3/16″ x 2″: 50 Linear Feet Per Gallon

1/4″ x 3/4″: 100 Linear Feet Per Gallon

1/4″ x 1″: 80 Linear Feet Per Gallon

1/4″ x 1 1/4″: 60 Linear Feet Per Gallon

1/4″ x 1 1/2″: 50 Linear Feet Per Gallon

1/4″ x 1 3/4″: 45 Linear Feet Per Gallon

1/4″ x 2″: 40 Linear Feet Per Gallon

3/8″ x 1″: 50 Linear Feet Per Gallon

1/2″ x 1″: 40 Linear Feet Per Gallon

3/4″ x 1″: 25 Linear Feet Per Gallon

1″ x 1″: 20 Linear Feet Per Gallon