Typical Uses of Floor Aid Flexible Membrane 528G

TERRAZZCO® Floor Aid FM 528G can be used in industrial, commercial, retail, institutional facilities and healthcare facilities.

Advantages of Flexible Membrane 528G

Product Information

Self Life: Epoxy resin system has a 1-year shelf life from the date of manufacture.

Storage Conditions: It is suggested that materials are stored in a temperature and humidity controlled environment. If this is not possible materials should be allowed to acclimate to controlled environmental conditions of application. Keep resins and hardeners separated from each other until ready for use. Materials should be kept away from sources of ignition. Materials should be stored in their original unopened container.

VOC Contents: Zero VOCs

Shipping: Available in the United States and North America. Contact Sales for Quote.

Technical Information

Tensile Strength: 1,200 psi

Elongation at Break: 120-170%

Adhesion: 300 psi (concrete failure)

Hardness Shore A: 70-80

Working Data

Working (Pot) Life: 40-50 minutes @ 75­°F

Re-Coat Time: 6-8 hours @ 75°F

Full Set Time: 12-16 hours @ 75°F

Full Cure and Maximum Performance: 5-10 days

Mixing Instructions

1. 1. Premix FM 528G resin part A using a low speed drill and jiffy blade for two to three minutes.

2. For one unit Flexible Membrane 528G (A+B,) add one unit Flexible Membrane 528G hardener (part B) to one unit Flexible Membrane 528G resin (part A). Mix using the drill and jiffy blade for two to three minutes. Materials are supplied packaged so that the entire contents of hardener part B is added to the container of resin part A and mixed in the container.

3. Pour the mixed material onto the working area and spread using a squeegee or trowel to achieve 35 to 45 mils dry film thickness yielding 100-130 sq. ft. per unit. Apply more material to areas showing greater penetration and soaking into the substrate.